Each gantry motor for Prorifi3D 350 is produced according to strict standards, including a vibration test with a report. Vibration is significantly reduced compared to ordinary high-performance motors, typically over 75% reduction, and print quality is greatly improved.
Description
Prorifi3D 350 is currently at Public Beta status with a $200 off discount
Current lead time: 6-10 weeks before shipping
Features
·Large build volume
350 × 350 × 350mm
·High print speed and high print quality
With advanced structural design, the Prorifi3D 350 can move at 600mm/s Max speed and 30000 Max acceleration and has higher natural frequency than conventional large 3D printers. The ω0 for the Y axis on a regular 350mm printer is typically around 35Hz, but on the Prorifi3D 350 it is over 50Hz. The ringing is significantly lower, and the print quality is better, even as good as smaller 3D printers.
*Printed at 200mm/s@10k accel
·Low vibration motors
·Better part cooling
With a high-flow fan and a carefully designed fan duct, the printed part is evenly cooled over a large area, dramatically improving the overhang quality.
*Model: Scandic Plate - 75° Overhang Torture Test
·Maker friendly
Easy to test
The tool head is equipped with a load cell sensor of up to 1kHz sampling frequency, which not only makes the first layer calibration more accurate, but can also be used as a testing tool for filament, nozzles, hotends and extruders, since the raw data can be read directly through USB with any serial monitor, such as the tool in Arduino IDE.
Easy to mod&upgrade
Open-source
Easy to swap extruder and hot end design
Upgrade kits coming soon
Easy to fix
Easy to assemble&disassemble design: 2-screws-design for extruder and hot-end, much easier to fix a nozzle clog.
Easily sourced, lower-cost components widely used.
What's Included
Complete kit for Prorifi3D 350, printed parts and electronics are included.
Upgrade kits such as the full enclosure, carbon fiber tube with linear rail, and AWD motors are sold separately.
specification
Technology | Fused Filament Fabrication (FFF) |
Motion System | Core XY |
Assembly | Self-Assembly Kit |
Firmware | Klipper |
Filament Diameter | 1.75mm |
Extrusion |
Single |
Max Build Volume | 350mm x 350mm x 350mm |
(13.8" x 13.8" x 13.8") | |
Max Nozzle Temperature | 300°C |
Max Bed Temperature | 110°C |
Motherboard | Mellow Fly C8 |
Screen | 3.5" TFT Touch Screen |
Bed Surface | Double-sided Powder Coated PEI Build Plate |
Printer Parts |
Included |
Current Status
Prorifi3D 350 is currently at Public Beta status with a $200 off discount
Current total print test time: over 1000 hours
Design and specs may change, the latest source files will be sent to you when your order is shipped and later when the design is updated.
Acknowledgments
As an Open-source project, our solutions and kits are developed based on the findings from the community. We cannot go this far without all the active members of the 3D Printer Community around the globe, who shared their wisdom and experiences with us.
Our solutions are upgrade kits that are built upon the existing designs. Here is a list of names and projects that we would like to thank and credit for their direct or indirect inspiration to our research and solutions:
VORON Design
Enraged Rabbit Community
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.